High Conductivity Copper Platoon
Product Description
High conductivity copper platoon is a high-quality conductive material for manufacturing windings, high and low voltage electrical appliances, switch contacts, and wires for electrical installation. The oxygen-free copper bus bar produced by our company uses oxygen-free copper rod as blank material. After continuous extrusion molding, the product has such advantages as high copper content (≥99.97%), low oxygen content (≤10ppm), dense and uniform structure, and low resistivity, low resistance difference, bright surface and free supply length.
Product model: WTMR (soft state), WTMY (hard state)
Introduction
1. Standard: Implementing the Chinese national standard GB/T 5585.1-2005.
2. General classification: Right angle & rounded corner (commonly known as straight edge, rounded edge).
3. Section range: 30--3000mm², Thickness range 3mm-12mm, width range 10mm-125mm.
4. Conductive performance: Closely related to the ambient temperature of the bus bar operation.
Calculating the current carrying current (40°) can be easily calculated according to the following formula: (Specification quantity units are taken in mm)
Bus bar specification: A (thickness) * B (width)
Monolithic current carrying ≈B*(A+8.5)
5. Weight calculation: At present, the copper bus bars produced are mostly 6 meters long, so the formula for calculating the weight after simplification is as below:
Weight(single copper bus bar) ≈A*B*0.0534 kg
Weight(one meter copper bus bar) ≈A*B*0.0089 kg
(Thickness: A (mm), Width: B (mm))
Product Tags:
|
|
Cupro Nickel Solid Copper Tube C70600 Low Resistance Difference Bright Surface Images
|
